Reply to thread

Message: [QUOTE="jmics19067, post: 307772, member: 27963"] I bought the regulator / rectifier from baja designs for my 98 wr and just followed the instructions and all worked out great for me. I took off the stator plate so I could really clean it well for the epoxy.. Then I laid the harness out as straight as I could coated the wire with a little oil and was able to slide it right thru. Radio shack has a neat little spray can of contact cleaner that has a little brush on the spray tube so you can scrub and spritz at the same time. [/QUOTE]