update to bike just dies on me from 7-17-05
checked the float height which was fine,all jets are clear,pulled the plug it looked fouled,bought a new one today and cranked the motor over to check my spark, perfect blue color so now i know its not the ignition or carb. checked the reeds, no cracks but three of them are not closed all the way if you put it up to a light i can see the gaps in them,not huge but def alittle light can be seen through them. anybody got any other ideas on things i can check if need be? i didn't get a chance to try and start it after i got the plug so i'll try it in the mourning and if it still is loading up i'll post an update, at this point im outta ideas of things to try if its no better tomorrow. any input would be appreciated, thanks
original post:
7-17-05
i finally got to ride my cr60 today and have a problem the bike smokes like crazy and does not bog but makes like a burbling or stuttering sound when you try to rev it out. or when you start riding it would only rev clean once i had the throttle pinned after about half a lap or so around my field it would finally rev clean but if i stopped completely or let the revs drop long enough it would started burbling again until i had it running wide open again for a bit. after riding for maybe 1 hour or so some slow through the trails and then the field i killed the motor and stopped for awhile, started it back up and it seemed to be running alittle better but after about 2 min or so it started bogging out of nowhere and would sometimes rev but it would be stuttering baldly almost made it home but it finally bogged out and died completely. i think its running way to rich from the sound of it and the smoke but am not sure,hopefully just fouled the plug. as far as i know its in fine mechanical shape good compression and all.