XXX Adrenaline Spo
Mod Ban
- Mar 25, 2008
- 69
- 0
Y'all
I was wondering..........
I know two strokes scavenge exhaust back into the cylinder Right??
Well my pipe took a beating on the right side on the pipe where it is about the largest diameter and it cracked the metal so I brazed it up with brass brazing rod (not steel wire such as clothes hanger) because I dont have the $$ for a new pipe right now, My concern is that some brass might have melted thru the crack. If this comes off inside the pipe is it likely to go out the exhaust or be drawn back into the cylinder by scavenging? The bike is an 01 CR250
I was wondering..........
I know two strokes scavenge exhaust back into the cylinder Right??
Well my pipe took a beating on the right side on the pipe where it is about the largest diameter and it cracked the metal so I brazed it up with brass brazing rod (not steel wire such as clothes hanger) because I dont have the $$ for a new pipe right now, My concern is that some brass might have melted thru the crack. If this comes off inside the pipe is it likely to go out the exhaust or be drawn back into the cylinder by scavenging? The bike is an 01 CR250