Hi, im about 1 week away from owning a brand new 04 KDX200 and i was wonder how i should break-in the engine, cause the last thing i would want to do is fry the rings on my first 2-stroke. thanks
There are 2 basic rules of thumb when breaking in a motor.
1. Drive it like ya stoled it. :thumb:
2. Follow the owner's manual.
The owners manual will detail the safest way to break in you new KDX.
Follow the recommended heat cycles and make sure to change the oil after the first ride.
Basically:
start the bike and let run until the cylinder is warm to the touch. NOT too long unless you have a fan blowing cooling air through the rads.
Stop the engine and let completely cool.
Take the bike for a 10 min ride making sure not to lug the motor or over rev. Try to vary the rmps. Stop and let cool completely.