Reply to thread

Message: [QUOTE="snowskater101, post: 1368245, member: 78908"] the moose stator measured 139 ohms when it should have 157-192 and wouldn't start the bike, it had spark but it was VERY weak. I matched the magnet wire sizes to what moose used and when I rewound the lighting part of the stator I was able to add 10 extra turns(65 per pole). It definitely works because my battery ran dead but when I would rev the bike up the brake light would get stronger. I'm just not getting enough power out of the two poles that I used for lighting. I'm figuring that if I use all 6 poles for the lighting coil, it would be enough power to run the bike and power the lights. I just don't know if the DC voltage will fry the cdi which I think uses AC voltage. by the way Im using a bajadesigns reg/rec. that is rated at 160 watts. thanks for the input, I think Ill try thumpertalk too [/QUOTE]