Reply to thread

Message: [QUOTE="mox69, post: 1174375, member: 76391"] When he said flushing he basically means put some oil back in the bottom end, then drain it out again. I would drain it, LIGHTLY crank the engine over with the kickstart (spark plug out) 5-10 times, then drain the oil. Your bike might run fine for a while, but something will eventually break down again and you will be rebuilding it. Take the advise of people who have been where you are before. Take the whole engine out of the bike, tear it down, put new gaskets in it and put it back together. It will be a good learning process. [/QUOTE]