Reply to thread

Message: [QUOTE="mxneagle, post: 147988, member: 21267"] Dont continue turning it! You need a cartridge holder tool. I've made several out of steel or aluminum tubing. Look down into the fork tube and you will see the top of the cartridge with a bunch of cutouts in it. Get a piece of tubing the correct diameter and cut the end to fit into the cutouts. Make sure the tube is long enough to extend above the damper rod. Drill a hole thru it on the top and used a long screw driver as a handle if you dont have a piece of drill rod. It can be a bit tough since you really cant measure any thing untill you get it apart. Another possibility is to use an impact gun to loosen it, but since it's already been turn enough to tear up the copper washer, my guess is that it wont work. [/QUOTE]