kelseybrent
Member
- Sep 25, 2002
- 266
- 0
Only for the front of your KDX.....95-01 CR 125 or 250.Originally posted by KAY DEE EXER
do they make the honda ones to fit a 98 kdx200????
thanx in advance.....
Originally posted by bscottr
Only for the front of your KDX.....95-01 CR 125 or 250.
For the back it's stock Kawi, Yami 90-97 YZ 125 or ZUKs 89-95 RM250. Not quite the same as Honda pads, but it gives you some options other than EBC.
I installed mine with new pin. It seemed either the pin was slightly oversized or (more likely) the holes in the pads were slightly undersized. I opened the hole a little with a drill bit and it was fine.Originally posted by canyncarvr
The pins tend to corrode. Was that the fit issue?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?