Installation
It is pretty straight forward on installation and all instrunctions are included. Just make sure you get the proper distance between the sensor and the magnet and don't tape the wires up past the brake line giude or they may kink.
I used the auto cal mode and my odometer reading is almost exactly correct.
As far as programing the unit with a roll cart, it seems difficult at first, but detailed instructions are included and it gets easier once you get the basics figured out. This is a very powerful unit and gives an abudance of information without toggleing from screen to screen. It's all right in front of your face at a glance of the eye. My favorite feature is the slide bar at the bottom , which tell you how far ahead or behind you are riding and if you are on time exactly, it just rides in the middle. It also has a nice little flag type icon that comes on when its ok to enter a check. Makes burning a check almost impossible if you keep an eye on the unit.
Simply put, The unit does all the thinking, all you have to do is keep the bike going, which for me is easier said than done :confused: