engine mods for 2 strokes

Joined
Mar 16, 2007
Messages
471
Likes
0
#1
what modifications can be done to a 2 stroke to make the engine perform more horse power. besides some reeds and a pipe and silencer and boring it out?
 

_JOE_

Subscriber
Joined
May 10, 2007
Messages
4,697
Likes
3
#4
76GMC1500 said:
Have it ported for race gas.
I didnt know porting was fuel specific. I thought the head mods generally performed along with porting were what required race fuel(i.e. higher compression).
 

XRpredator

AssClown SuperPowers
Damn Yankees
Joined
Aug 2, 2000
Messages
13,511
Likes
19
#5
a CB antenna

rebel flags

a "Bel Ray" sticker on the front fender
 
Joined
Oct 19, 2006
Messages
2,142
Likes
1
#6
_JOE_ said:
I didnt know porting was fuel specific. I thought the head mods generally performed along with porting were what required race fuel(i.e. higher compression).
It can be, changing the position of the ports in the cylinder changes the effective compression ratio. It can also change the volumetric efficiency which has an effect on compression pressures. I also tend to glob cylinder and cylinder head work in with porting. Those can have huge effects on octane requirements.
 
Joined
Oct 19, 2006
Messages
8,130
Likes
2
Location
Merrillville,Indiana
#8
Call Eric,go big,BIG,oh yes mo power everywhere and run firepower,with a v-force reed,sst pipe and silencer.Learn to jet and send your suspension to mx tech!
 
Joined
Oct 19, 2006
Messages
8,130
Likes
2
Location
Merrillville,Indiana
#10
Call him during business hours,Telephone: 1-630-825-5645.If you want to go all out or not!Some of the 125's vary on how big and if the cases are needed,say bye-bye to 250f's.They are running the snot out of these mods in europe.