FCR jetting

[knobbiethrower]

What is the difference from an OCEMN to a OCDMN ? From an OCEMN to OCDMP ? Do to the shortage of OCEMN's are these richer or leaner ? OCEMN @ #4 clip = OCDMN ?? James Dean ?

 

[fremontguy]

The EMN stays leaner on first 1/2 of throttle but goes richer on second half compared with DMN needle. I have both needles for 450 and like the DMN#3 clip with 175 main. Only did one test at sea level, will probably jet down for higher elevations.

 

[knobbiethrower]

Do you mean on the main jet?

 

[fremontguy]

Yes, main jet. My 450 jetting might be different or rich for 525 jetting though.

 

[knobbiethrower]

DMN with #3 and 175 main work just fine, thanks for the help fremontguy.

 

[WoodsRider]

New bike huh?

Why don't you bring it up to Catraland on Saturday and "break it in" properly. Or better yet, give it to me and I'll "break it in" for you... then again you do a pretty good job all on your own. :p

 

[knobbiethrower]

"Broke" it in properly last saturday and in the rain sunday morning. Let's clarify something hear woods, the bike has to break me in !

 

[WoodsRider]

Originally posted by knobbiethrower
Let's clarify something hear woods, the bike has to break me in !

Hopefully not like your last Katoom! :eek:

 

[knobbiethrower]

Originally posted by WoodsRider

Hopefully not like your last Katoom! :eek:

smart*** :thumb: