Eric, thanks for your great article on this page :
http://ericgorr.com/twostktech/twotopweb_2t.html
You mention that the size of the flexihone should be 10% smaller than the cylinder size. Is that right?
Im thinking CR500 jug @ 90mm, so a 84-85mm unit ok?
Thanks for that.
Cheers.
Rob :)
http://ericgorr.com/twostktech/twotopweb_2t.html
You mention that the size of the flexihone should be 10% smaller than the cylinder size. Is that right?
Im thinking CR500 jug @ 90mm, so a 84-85mm unit ok?
Thanks for that.
Cheers.
Rob :)