Reply to thread

Message: [QUOTE="gator kdx, post: 659366, member: 36274"] The float level has been a nightmare. I've tried settings ranging from 14-18mm hoping to find a good location. No matter how high I set the height though the carb keeps dripping. I've replaced the needle 2x and cleaned the needle seat thoroughly. The float is well used but is not waterlogged or misshapen. I've got another float on order and hopefully somehow that will resolve the problem. If not I guess I will give up on this carb and maybe see if i can find an airstriker or some other replacement. I'm still unsure about my original question though, is it possible for a too high float level (resulting in carb peeing) to produce a low bog? I would have assumed that the excessive fuel would increase the pressure in the bowl forcing more fuel through the jet richening the mixture. Thanks in advance for any suggestions or advice [/QUOTE]