Reply to thread

Message: [QUOTE="Mikeb, post: 377803, member: 16131"] I had a fellow tell me once that he made a tool out of a plastic champagne cork and some tubing. He said the plastic cork fit the drain plug hole perfectly. The whole trick is to get a clear plastic tube coming from the float bowl drain plug and up along the side of the carb so you can see how high the fuel in tube is since liquid will raise only as high as it is in the bowl. Seems like a pretty easy thing to make. In fact you could buy a spare float bowl drain plug and drill and tap a fitting into it and attatch a 6 inch length of tubing and use the existing hose vent clamps to keep the tubing in an upright position. If someone builds one and it works take pictures and send them in. [/QUOTE]