I have 2003 kdx 200 and would like to add a new pipe. I can't find a pc pipe or anything other than the fmf's. I'm sure both are good but I dont want to loose any top or bottom end. Does anyone know if either pipe will add power to its intended range without causing a loss on the other end of the range (below stock power)??
I had an FMF "torque/woods" pipe on my bike back when it was a KDX200. There was an increase in both bottom and top end power. No loss on top - actually gain.
I know that there are a few on here who run both pipes on their KDX200's. Hopefully they will chime in.
You should be able to find a PC pipe for your KDX too.