Ok, normally I consider brake repair and easy task. But fellow riders im just stumped. Ok hears whats wrong.. First of all I let my girlfriends mother ride my 1999 kx125, and as i feared she crashed. Luckly she was not too badly injured, but my bike is another story. When she fell the bike got dumped on the left side and now there is no pressure in the brake lever. :bang: So naturly I take the bike home look it over and see no physical damage to the mastercylinder or caliper. I procede to bleed the brakes and it seems that there just isn't enough pressure in the break system to move the pistons much, If i pump for what seems like forever I can get one of the pistons to go all the way out, but the other one only seems to go about halfway. What should I do? I took the mastercylinder apart all the internals look good, the brake line shows no signs of leaks... Im stumped :bang: