I'm looking for a little help with a problem I'm having. Hopefully someone can point in the right direction.
I have a 04 Husqvarna TE250 4T.
45mm Marzocchi and Sachs rear shock
The bike has been revalved front and rear
Springs are stock front/rear,
new S-12 front/rear
I'm 155 pounds.
My problem is this. I have put about 200 miles on the bike since the revalve (400-425 miles or 30 hrs total on bike). The last 50-75 mile or so I have noticed that the front seems to have a mind of it on sometimes (mostly mud) The forks seem be hanging down in the stroke at times, it seems to be when I let off the gas (I think). It's almost like the fork just locks in that postion and there is nothing I can do about and then I'm on the ground. I have noticed that it doesn't seem to be as bad when the clutch is pulled in (no engine braking)
I think maybe the front end has been like this the whole time. But since it has been muddy the last month I've noticed it more. I have adjusted the comp/reb. clicker front and back, tire pressure, sag, ect.. with not much improvement.
The bike works great on everything else (root, ruts, ect..)
Thanks for any help.
brown