Graphics trying to peel away from rad shrouds?

Biglmbass

Member
Jul 29, 2002
61
0
OK, folks since the bike is a KDX, I'm posting my thread here.

I noticed yesterday that my N-Style graphics are lifting and peeling away from the bottom of the left radiator shroud. Can this be easily fixed? Has anyone ever experienced this? The graphics aren't old at all and have only been on the bike since last October. (I don't pressure wash, so I know that's not the cause.) Instead of trying to apply/force some type of adhesive where I need it to go, I wonder if I'd be better off trying to completely remove the entire sticker and then trying to reapply it. Dunno how well the other part of the sticker is "stuck" though. What type of adhesive should I use?

Any help on this? What to do, what to do. Any and all commets appreciated.
 

Twiztid One

~SPONSOR~
Aug 19, 2003
312
0
if you try and peel the whole thing off it will strech it out and will never look right again . try and use some emblem glue on a tooth pic and work it in there . then set something on it till it dries , sometimes its easier just to get a new kit and start over .
 

outrgus

Member
Jan 15, 2003
95
0
my graphics were doing the same thing, so i used some crazy glue and it seems to be holding.
 

JCW

~SPONSOR~
Jan 23, 2003
333
0
Check out this web site. I got nice KDX graphics for $25 through this site on an e-bay auction. The look exactly like the 03 graphics, but they are thicker and hold up well.

http://mxusa.zoovy.com/

JCW
 

tedkxkdx

LIFETIME SPONSOR
Feb 6, 2003
393
0
If you peel the graphic off it will separate. I use 3m spray adhesive to fix all my peeling stickers.
 

VaKDX200

Member
Aug 4, 2003
17
0

What I have found to work when t hey start to peel up, is take a blow dryer and heat the whole sticker up whille it is still on the bike and re-press it back down. Have never had another one come back up, since it re-energizes the glue on the graphic.
 

wibby

Mod Ban
Mar 15, 2003
997
0
Stickers?

I just blast 'em off with my pressure washer! ;)
 
Cookies are required to use this site. You must accept them to continue using the site. Learn more…