Home
Basic Dirt Bike How-To's - Video
Dirt Bike How-To's - Video
Living The Moto Life - Video
Bike Tests | Shoot-Outs - Video
Forums
What's new
Latest activity
Log-In
Join
What's new
Menu
Log-In
Join
Navigation
Install the app
Install
More options
Close Menu
Forums
MX, SX & Off-Road Discussions
General Moto | Off-Topic Posts
handle bars go crazy
Reply to thread
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Message
[QUOTE="adam728, post: 1207270, member: 55463"] Getting the suspension set up properly is key. Headshake is usually caused by too steep of a steering head angle, causing the bike to be unstable. There are many variables that can cause head shake. [list][*]Fork springs too soft (too much sag) [*]Fork compression too soft/rebound too stiff (rides low when hitting bumps) [*]Shock spring too stiff [*]Too much preload on the shock (not enough sag) [*]So basically any overall suspension imbalance that causes the rear end to ride higher than the front. [*]Front tire pressure and condition of the tire also comes into play. Low pressure or a beat down sidewall will cause lots of flex and also head shake. [*]Headset bearings, loose or worn, can cause head shake. [*]Loose front wheel bearings can also add to the problem. [*]Riding style can also add to head shake, like getting way up front on the bike in choppy high speed stuff [/list] My personal experience is to get your weight back and hammer the gas when head shake starts. This loads the rear end and raises the front, pulling the head tube angle back into a more stable geometry. I had a 1994 YZ125 that only suffered head shake when getting on the brakes with my weight towards the front of the bike. No amount of changes would cure it, so I just had to adapt my riding style. It wasn't a common occurance, and only happened on high speed trails. I also had a 1999 KX125 that had HORRIBLE head shake on the first ride out. Turns out the previous owner had cranked the preload on the shock. With my 180+ lb butt on the bike it had under 2" of sag. I should have checked before ever heading to the trail. Setting the sag ALMOST completely cured the problem. Getting rid of the dry rotted 8 year old original tire did the trick. The point I am trying to make here is that you should make sure your bike is in good working order and setup properly before throwing money at a steering damper to mask some other problem. [/QUOTE]
Verification
Which ocean is California closest to?
Post reply
Forums
MX, SX & Off-Road Discussions
General Moto | Off-Topic Posts
handle bars go crazy
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
Accept
Learn more…
Top
Bottom