Reply to thread

Message: [QUOTE="ojasia, post: 1431161, member: 124337"] Ok have a '02 CR125 bought knowing this---> bike stalled pulled plug coolant all over it/ in cylinder. Pulled head, to me it looks warped and there is giant pits all around the flat side none really in the dome part there almost 1mm deep so I went ahead an ordered a re surfaced head decked at .005 later on reading about this stuff starting hearing about clearance compromises stuffing extra base gaskets and squish bands :O yeah. So idk if the guy re surfaced and put in a squish band. But really my ? is if the deck was re surfaced .005 what can I expect to have to do extra other then new gasket and installing the head. [/QUOTE]