Reply to thread

Message: [QUOTE="ojasia, post: 1431167, member: 124337"] ok checked cylinder walls, looked good just a little maybe half inch curve on the top edge seemed burnt. not pits, and no warpness there. the head is what looks beat the H*ll up. But with this re-surfaced head I have on the way with a new gasket and I'm gonna pick up some copper gasket spray, you think I will be good to go. i dont really understand this squish band thing on the head. Sooooo ? if the guy that re-surfaced this head completely flat and didnt know about milling the squish band in will I need to take this head to be milled. or do you kno of people bolting on completely flat heads and running good. [/QUOTE]