Reply to thread

Message: [QUOTE="bbullet, post: 380731, member: 30081"] I HAVE A '96 XR 250 WITH FMF Q PIPE, AND STANDARD FREE MODS. I AM EXPECTING RECEIPT OF MY TM 34 CARB THIS WEEK, AND I AM HOPING SOME OF YOU OUT THERE CAN HELP ME WITH SOME BASELINE JETTING. I PLAN ON USING A K&N FILTER LATER, BUT I WILL USE THE UNI RIGHT NOW. I AM AT 1000-1500 FT IN ELEVATION. STOCK BORE AND CAM. I WILL ADD THE WISECO 284 KIT AND HOTCAM IN AUGUST WITH SOME MILD PORTING. I AM HOPING SOMONE CAN HELP ME WITH ANY JETTING RECCOMENDATIONS FOR CURRENT MODS AND FOR THE FUTURE ONES MENTIONED ABOVE. ALSO I AM WONDERING IF THE STOCK THROTTLE CABLE(S) WILL WORK. I NOTICED THAT THE XR'S ONLY TM34 KIT COMES WITH A GUNNAR GASSER THROTTLE AND CABLES AND THEY JET FOR YOUR CURRENT ENGINE SPECS. I COULD'NT PASS UP THE DEAL ON THE CARB ELSEWHERE FOR $150. I WOULD KINDLY APPRECIATE ANY INFORMATION !!!!! THANKS, BULLET BOB [/QUOTE]