Reply to thread

Message: [QUOTE="bbullet, post: 385136, member: 30081"] thanks 'Ol'89r........ but Sudco was of no help. According to their tech, they have never done ANY r &d on any Xr250. However, I did manage to find a baseline setting for my modified XR250(284).If anyone is interested in the baseline jetting for a Mikuni TM34 on an XR250 with 284 kit, hotcam, freemods,FMF Q pipe, and some porting, they are as follows as per Al Baker's XR's only: Main Jet = 195 Pilot = 40 jet needle = 6DH3 needle jet = 02 I have not confirmed this setup yet( I havent even ordered the parts), but I will post final settings upon completion of final modifications and tuning........ If anyone cares.............................................................. Bullet Bob [/QUOTE]