ok here's the problem, it's the yz 125 lol . got my new plastic today everything went on good, but one of the scrouds . the bolts thats in the gas tank, wont come out . the inside where the bolt goes in is turning ! so any suggestion on how to stop them or how i can get hole piece out . here's what i have tried, needle nose to big, not enough room between bolt and gas tank . tried prying with screw driver see couldn't hold the inside so i could get bolt out ! no luck there either . nerver had a problem like this before, something so simple but so agervating . help
fixed if anyone has problem like this though let me know .
fixed if anyone has problem like this though let me know .
Last edited:
