Reply to thread

Message: [QUOTE="cr250brider, post: 1395236, member: 119870"] ok, im outta hospital, i pulled carb again, cleaned again, backflushed all passages with carb cleaner and air pressure. I have installed a #60 pilot jet. i ran engine, made it idle, sounds good. good throttle response, revs smoothly when moving the throttle all the way to wot. so i checked the throttle at part throttle and same response as before. i start to crack throttle and just as i get to 1/8 of throttle, engine revs really high. i know this makes no sense. but heres an example of when this would be a problem. I am slow riding the woods trails and when i hold throttle at this point the bike would rev really high. and not even on part throttle. wat the heck. i am about to put a completely rebuilt bike on the sale list. i know i cant get all my money back but if i can get some ill be happy. [/QUOTE]