Reply to thread

Message: [QUOTE="ellandoh, post: 1395247, member: 55695"] well i wouldnt know what # but i would go to FMF website they have jetting recommends for bikes with their products. the only reason i say this is because i hear needles and seats can wear over time and the throttle range it is having problems is in the pilot and needle circuit range. it is not sucking air somewhere else if you can crack it 1/2 to full throttle with no problems. so your carb is leaking air at little opening or starving it of fuel at little opening. 20$ worth of brass in the carb with new jets, needle and seat will eliminate the possibility it is starving for fuel. [/QUOTE]