dansdr125 said:i got my carbs rebuilt on my 1997 cr125..ran it the day i got it fixed ran fine just little coppy up on top end it kinda cut out...?can anyone help on that one?
number 2 problem..i broke the water jacket of the head i had get a new one put on but did not put new gasket on...started it back up last night it kinda smoked alot and gas wuz coming out one of the carb tubes...?and i let it warm up tried riding it start to cut out on me...can anyone help thanks
thanks buddy...and my dude messed with the air screw and it stop smokeing and ran better i rode it at the trails today and ran pretty good could run better lil bulging in 1st gear..and i broke my damn cluth handle today...when do u know if u need a new cluth my cable screw is unscrewed as far as it goes and my cluth dont grab till the lever is alomost all the way out and it grabs weird?thanksRotorranch said:Yep...the CR125 is supposed to have one carb. :rotfl:
Have you tried a brand new plug? Did the jets get changed in the carb? Fresh gas?
The needle and seat is not shutting off the fuel flow to the carb. That causes an overly rich condition, or flooding. That is also possibly the cause of problem #1. Take the carb off, and set the float level following the instructions in your shop manual.
Rotor
i aint taking the damn thing out....inless i gotta lol...IndyMX said:I'd say when you take the clutch apart and measure the disks, and they are out of tolerance.
i dont under stand what ur saying im sorry refase for me please thanks...2 strokes for life said:dansdr125, if you think that is har you are in for a world of hurt when the crank bearings need to be replaced.
is there away to stop running rich..?>should i adjust the air screw some more? and is thats why it bulgs on low end..intill about power band2 strokes for life said:dansdr125, means your running rich.
dansdr125 said:is there away to stop running rich..?>should i adjust the air screw some more? and is thats why it bulgs on low end..intill about power band
dansdr125 said:i dont under stand what ur saying im sorry refase for me please thanks...
ok lets be a smart ass...that's why people make forums like this to help people...dumb ass...and thanks for some what of ur help...i already rebuilt the carb so there for i have to jet is stillOl'89r said:Let me rephrase for you.
If you do not have the knowledge to remove your side cover and inspect your clutch, you will be in a world of hurt when you have to do something that requires splitting the engine cases.
Just tell us what answer you want to hear and we will give you that answer. :| Foxyfrocks already gave you the proper answer. "Buy a manual and learn to jet your bike.."
Or, you can just waste our time until you hear the answer you want to hear. :cuckoo:
Buy a dictionary while your at it.
dansdr125 said:ok lets be a smart ass...that's why people make forums like this to help people...dumb ass...and thanks for some what of ur help...i already rebuilt the carb so there for i have to jet is still
?
dansdr125 said:i got my carbs rebuilt on my 1997 cr125..ran it the day i got it fixed ran fine just little coppy up on top end it kinda cut out...?can anyone help on that one?number 2 problem..i broke the water jacket of the head i had get a new one put on but did not put new gasket on...started it back up last night it kinda smoked alot and gas wuz coming out one of the carb tubes...?and i let it warm up tried riding it start to cut out on me...can anyone help thanks
dansdr125 said:thanks buddy...and my dude messed with the air screw and it stop smokeing and ran better i rode it at the trails today and ran pretty good could run better lil bulging in 1st gear..and i broke my damn cluth handle today...when do u know if u need a new cluth my cable screw is unscrewed as far as it goes and my cluth dont grab till the lever is alomost all the way out and it grabs weird?thanks
dansdr125 said:is there away to stop running rich..?>should i adjust the air screw some more? and is thats why it bulgs on low end..intill about power band
thanks for everthing i aint going to fight over the web with everone thats plain stupid..but im new to dirtbikes i own a street bike and its fuel injected i dont know **** about carb's yea i should have read the stickys first but had know time..and thanks for everones help im not really worried about spelling im not in class or school so what matters...?but its w/eRotorranch said:The third post in this thread gave you the answer you need, but yet I don't see where you heeded the advice given by any of the posters that answered your question.
There is a problem with the carb. Fuel flows out the overflow. Either the float level is too high, or the float is stuck. That will make the engine run rich. You can fiddle with the air bleed, the jets, whatever...but it won't fix the float level problem.
Looking over your past posts from the last 6 months, and judging from your technical abilities, and willingness to learn, you obviously need to find something less technical to ride. Something more your speed. Maybe something like this:
Rotor
for 1 i never called anyone stupid for 2 do u gotta be like everone else and jump on my case i said its stuiped to fight online...cuz we aint never going see each other but if this is going to be notting but fighting on this subject then lock the post... :blah: :blah:2 strokes for life said:Rotorranch, you might be funnier here then GOR.
dansdr125, So your asking the questions and yet were the stupid ones, you did not have time to read the stickys but you have time to post why you did not have time to read them, and what good is proper english anyways?
dansdr125 said:for 1 i never called anyone stupid for 2 do u gotta be like everone else and jump on my case i said its stuiped to fight online...cuz we aint never going see each other but if this is going to be notting but fighting on this subject then lock the post... :blah: :blah:
your right but i aint going fight online like a little 12 year old i guess people get mad cuz i cant spell,im sorry im not a good speller or know how to use grammer better then someone else that makes you people look like assholes making fun of how someone spells...so thats why im saying sorry by jumping on here as what u people say and asking quistions i read some stickys but id rather get couple of you peoples advice...if that hurts i want ask anyother quistions and sign up on a new site...thanks and lock this posta454elk said:Dan, don't get us wrong, we are here to help but understand this is not a site to pop in and act like a child. We are mostly adults, minus 89er, and the rest are young people with respect and we respect folks that come here as long as they do the same. Proper English makes your thoughts, suggestions and questions more understandable as well as respectful. Acting mature will get you far here, if you choose to do otherwise, then we probably won't be able to help you. I believe your question was answered numerous times already. Save the childish behavior for another site. If you choose to hang around here for a while, trust me, you will swim in the vast knowledge that flows here and as a plus, you will indeed mature into a young adult that will have something to offer here as well. Good luck.
Elk
dansdr125 said:your right but i aint going fight online like a little 12 year old i guess people get mad cuz i cant spell,im sorry im not a good speller or know how to use grammer better then someone else that makes you people look like assholes making fun of how someone spells...so thats why im saying sorry by jumping on here as what u people say and asking quistions i read some stickys but id rather get couple of you peoples advice...if that hurts i want ask anyother quistions and sign up on a new site...thanks and lock this post
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?