Reply to thread

Message: [QUOTE="Bigdogdaddy69, post: 1302963, member: 85137"] well I bought a new wiesco crank off ebay. It came with bearings and seals. I previously bought bearings for the old crank but the crank was bad. So i go to put the new bearings on and after i pressed on the flywheel side i attempted the other side. With a very hard push you can push the bearing on, but it will pull off easier then it goes on. I have tried every bearings, all the Numbers matched up. Im pissed. I have heard about a trick where you take a punch and hammer and make little marks on the crank... anyone ever hear of that??? [/QUOTE]