Originally posted by dirtybkr
I have a 93 kx250 . When I used to refill the tranny with oil after a change I would fill to the middle of the sight glass .My clutch would drag a bit . I had a new clutch , the basket is in good shape and the free play at the lever was adjusted properly . I then started to use a ratio right to measure tranny oil . I fill with exacty the amount stated in my manual , even though the level does not reach the sight glass . The clutch works fine now . I just hope that it is enough oil . The plates have about 10 hours on them , we'll see how long they last .
Originally posted by Senior KX Rider
My KX also creeped when I bought it new. I started running Type F ATF in the gearbox and the problem went away. Been using it for two years now. I tried everything to stop the creeping with no luck until I changed gearbox oils. Don't mean to open THAT can of worms again but it worked for me. :)
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?