I have an 04 husky wr 125, and have been having trouble with fouling plugs. This mostly happens in the tighter forrestry going where you dont get to get her on the pipe as much.
I live in the uk, the weather ranger from crap to terrible, around 10 - 20 deg C at the moment and i am running the standard jetting, which is 35 pilot, 400 main and needle in third position.
Has any one had this same problem ? not sure which way to go about it, thinking of either going down a size on the pilot or dropping the needle a notch. On the faster going, no problems, but arfer a lot of slower, tight going, she is stalling a lot, spooge coming out of the tail pipe and sometimes results in a fouled plug.
Any advice appreciated.
I live in the uk, the weather ranger from crap to terrible, around 10 - 20 deg C at the moment and i am running the standard jetting, which is 35 pilot, 400 main and needle in third position.
Has any one had this same problem ? not sure which way to go about it, thinking of either going down a size on the pilot or dropping the needle a notch. On the faster going, no problems, but arfer a lot of slower, tight going, she is stalling a lot, spooge coming out of the tail pipe and sometimes results in a fouled plug.
Any advice appreciated.