mattquinones

Member
Jun 27, 2012
4
0
I have a 2005 honda crf150f and i was just wondering if someone can clarify how many turns the air screw and the idle screws should get.
The bike runs and idles perfectly on full choke, once the choke is halfway it idles fine but wont get any kick, it sputters after you give it gas. and once you take the choke off it dies. HELPPPPP!
 

Ol'89r

LIFETIME SPONSOR
Jan 27, 2000
6,958
45
Classic clogged pilot jet. Take the carb apart and clean the pilot jet.
 

Ol'89r

LIFETIME SPONSOR
Jan 27, 2000
6,958
45
Make sure the passageways are clean. When you have the jets out, blow air or carb cleaner through the passageways. Also, check your valve clearance. Tight valves will affect your idle. The fuel screw should be about 1 1/2 to 2 turns out.
 

Welcome to DRN

No trolls, no cliques, no spam & newb friendly. Do it.

Top Bottom