Help Issue dt 200 yamaha dying

M

Machine967

Member

Aug 3, 2018

4

0

• Aug 3, 2018

• #1

Good day
I need help
I have a 1986 dt 200 yam and i have a wears issue

The bike start no problem and run idle and reach is working temps and after 10/15 min of idle it die.

If i take it for a spin it goes ok ans at any time i can die on me and some time it will start after 1 crank or it take 30 crank.

Any one have a idee ?
Thanks a lot for the help

 

Okiewan

Admin

Dec 31, 1969

29,555

2,237

Texas

• Aug 3, 2018

• #2

First question is why you would let it idle for 15 minutes? Why would you need to?

 

M

Machine967

Member

Aug 3, 2018

4

0

• Aug 4, 2018

• Thread starter
• #3

I was moving all the wire to see it it was a loose connection

The first issue it was it due wen i was driving. So i try to see if some thing was loose and thats when i saw it die after few min of idle

 

jaguar

~SPONSOR~

Jul 29, 2000

1,503

82

South America

• Aug 9, 2018

• #4

turn the idle air screw till it has the highest RPM then turn it 1/4 turn clockwise then turn the throttle slide stop screw till it idles at the correct RPM

 

M

Machine967

Member

Aug 3, 2018

4

0

• Aug 20, 2018

• Thread starter
• #5

I try it and nothing change
I notice soon it start to die even if i give gaz a little bit its like its flooding

 

jaguar

~SPONSOR~

Jul 29, 2000

1,503

82

South America

• Sep 14, 2018

• #6

take the carb jets out and push a wire through them to clean them out, especially the idle jet since its the smallest. make sure you have good fuel flow to the carburetor and that the float valve is working correctly