burmahiker
Member
- Mar 19, 2006
- 12
- 0
I have a kdx200sr (1989 G1) and I am wanting to improve the jetting. The guy who had the bike before me had put a wire in the main jet (???) which I have now taken out. Since then it seems to have much of the snap taken out of it, but still has good bottom end. I run a 122 main jet with a 38 pilot jet and live at about 1000 feet from sea level. Its also very hot and humid here (Thailand) if that affects things as well.
Any help would be much appreciated! I am thinking of maybe going down to a 118 or 120 main jet, but am not sure if I should instead adjust the jet needle. (btw my carb is a 28mm which is standard for the sr's)
Any help would be much appreciated! I am thinking of maybe going down to a 118 or 120 main jet, but am not sure if I should instead adjust the jet needle. (btw my carb is a 28mm which is standard for the sr's)