Jetting Problem

[SPARKY52]

I Have 2001 Kdx 200. I Have Just Installed The Boyesen
Reeds With The Aftermarket Pipe, Opened Airbox Lid,and Re-jetted To #42 Pilot & #152 Main. When I Put It All Back Together Its Idleing At Around 3,000 Rpm And Niether The Idle Screw Or The Air Screw Have Any Effect On It. What Have I Done Wrong In The Carb.?

 

[krazyinski]

I Have 2001 Kdx 200. I Have Just Installed The Boyesen
Reeds With The Aftermarket Pipe, Opened Airbox Lid,and Re-jetted To #42 Pilot & #152 Main. When I Put It All Back Together Its Idleing At Around 3,000 Rpm And Niether The Idle Screw Or The Air Screw Have Any Effect On It. What Have I Done Wrong In The Carb.?

sounds like you might have A: reeds in backwards, B:air leak on the reed block.

 

[kx125412]

C:Kinked throttle cable, make sure the slides closing