Jetting Question for KDX 200 With Pro Circuit Pipe

Hi Guys,

I have recently purchased a 2000 KDX 200 (this is now my third KDX in the garage, also have 02 200 and 220). I bought this pipe with a Pro Circuit platinum pipe on it with the 304 silencer on it. It has quite the snap compared to the other 2 stock KDX's. The new bike is stock except for the pipe. Anyone have suggestions on what I should run in jetting for this? I ride mostly in Minnesota, roughly 1000 ft elavation.

Thanks,
Dakota Kid

Thanks John, Sounds like a good starting point! I will keep an eye on the plug!

Dakota Kid