Reply to thread

Message: [QUOTE="acutemp, post: 100899, member: 16367"] Assuming that the needle jet on your air striker carb is the same as the stock kdx 200's, you are rich across the board. Do you still have your stock carb? If so replace the slide and needle with the stock parts and try a 42 pilot 152 main, stock needle #3 combo. Keep an eye on the plug to make sure that you are not to lean in that department. If you don't have the stock needle you will want to get something leaner there. The one you have is way rich (1469k) something from sudco in the AEN-P or BEN-P would be much closer IMO. The size of your needle jet can change all of this though so keep that in mind. Let us know how it works out.--Dan [/QUOTE]