I know this has probably been asked a thousand times, but I get more confused with each differing source of information I find. The FMF Website suggests a 50/48 pilot, 155 main and 2nd clip position setting for a 2000 KDX 220 bike with an FMF pipe, this is very different from the 42 pilot, 145/148 main, 2nd clip position suggested on just KDX (at least I think it is, I'm new to this). As I understand it the higher the numbers the richer the mixture.
The only engine related mods I have to my bike are the air box lid modified and a KG-35 FMF pipe. What are the stock 2000 KDX 220 jetting settings anyway? The owners' manual is not helpful. My concern is the stock jetting being too gasoline rich for my bike with these mods. Is it necessary for me to adjust the jetting?
Thanks in advance for any advice. :(