Reply to thread

Message: [QUOTE="FlashBurn, post: 294625, member: 24740"] I may have missed this in the other posts but the pipe you bought is a torque pipe.The fmf 30 is a rev pipe.The 35 pipe is known for going a little flat on top but it gives you more stump pulling power .I have a 220 with the same exact carb jets and reeds and needle setting but the 220 carb is a 33mm.I purposely put the torque pipe on my bike.I wanted the extra grunt and it allows me to run a taller gear set so I don't lose to much top end.The pipe you have may not put the power where you want it. Mike [/QUOTE]