Hey, so I have a 1997 KDX 200 and I have noticed that the clutch is really hard to pull compaired other bikes. My friend also has a 1995 KDX200 and his clutch is also really hard to pull. My question is; 1.) Is the clutch on these bikes suppose to be really hard to pull? 2.) What can I do to make it easier?
KDX200 Hard Clutch?
- Thread starter KirbyCurt
- Start date
SpeedyManiac
Member
- Aug 8, 2000
- 2,374
- 0
Is the cable well lubed? You can also try polishing the actuating rod that goes into the cases.
Zerotact
~SPONSOR~
- Dec 10, 2002
- 1,001
- 0
a felow KDX rider in our series had this same problem, he said there was some kinda roller bearing inside that went out. He didn't act like it was a major engine part, just something inside to were you had to open the clutch side up, but not split the case....
Green Hornet
Member
- Apr 2, 2005
- 837
- 0
"GOT LUBE" Oil the thing for christ sakes. If that don't work, then buy a new cable. Is your throttle hard to twist also, LUBE THAT TOO. They sell the air can in any bike shop :p
