Any help is greatly appreciated.
My problem is bottom-end torque.
Purchased used and as it stands now:
FMF header and silencer. Turbine core - Header not sure.
Boyesen Rad Reeds
13/47 gearing.
KIPS cleaned and working.
jetting is a 150 and 48
No low-end torque and has a very strong mid and upper.
Any ideas on increasing the low end for tight technical riding.
My problem is bottom-end torque.
Purchased used and as it stands now:
FMF header and silencer. Turbine core - Header not sure.
Boyesen Rad Reeds
13/47 gearing.
KIPS cleaned and working.
jetting is a 150 and 48
No low-end torque and has a very strong mid and upper.
Any ideas on increasing the low end for tight technical riding.