Is that steel insert fairly large? Wondering if it's designed solely for stock or if it looks like they considered wide aftermarket pegs, some higher, some lower... what about moving the stock pegs down and back?
I've run the BBR ffor a season, yes there is a ding, but I really can't see it getting to the point of getting weak, unlike the stocker. The pic below isn't great, needed the tripod :mad:, had to use the flash... but as you can hopefully see, the damage is very superfical. The lower, larger mark was with the pegs in the stock position, the higher small mark is after moving the pegs down.
(BTW, the 1' shorter kickstarter makes a big difference)