Reply to thread

Message: [QUOTE="DirtBiker125CR1313, post: 1414591, member: 120147"] Ok so I took it back apart and found the punch marks on the gears. I put every thing back and now there is some tension on the spring. I put the kick starter on and tested it with my hand and it seems normal now. But I had to hold the spring in the hole it attaches to on the crank case. It barley stays in. Also when I try to put the crank case cover back on it will not go on. I managed to get it on once but then the kick starter would not move when I bolted everything up. Does anyone have any idea what my problem is now? [/QUOTE]