Ktm 65

[zorlac_147]

I just bought a used 98 KTM 65 does anyone know the stock jetting specs? It will be ridden at 4000 ft and at sea level any tricks to jetting this bike? also is there any onther things to keep an eye? any help would be greatly appreciated.

 

[ktmdad]

Start with a 220 main, 35 pilot and clip in middle of needle.

The 3rt/4th combined gear on the '98 & '99's were nortorious for stripping off teeth. KTM upgraded the gear and once installed, was fine.

Watch your fork tubes as they will bend. Upgrading to a set of Buchanan spokes wouldn't be a bad idea as well.