Reply to thread

Message: [QUOTE="junkjeeps, post: 1045298, member: 26555"] Jaybird Have you removed the blades and checked them? Could be a bad/bent blade. There should also be some adjustment for the deck on the deck hangers. Usually at least an inch of travel on the treads of the hangers. I know some of the Murray riders have a set up where you put the rider on level ground and loosen/tighten a few wing nuts and it self levels. Seeing as Craftsman doesn't make any of their own stuff, you might possibly have one like that. One other thing to check is blade spindle bearings. Let us know what you find. Mark [/QUOTE]