Hi all, greetings from sunny Spain,
Long story short; first used Evans coolant last April---Almost immediately started seeping coolant from water pump weep hole; only dripping ever so slightly (2 or 3 drops, stopping once the bike was completely cool).
Figured the seal was on its way so I changed both the inner lip seal,and the whole mechanical seal assy. I also popped in a new bearing for insurance. The pump shaft appeared to have no wear whatsoever so I reused it.
First time out with the resealed pump, exact same "drip drip drip, then stop"... has anyone else had any similar experiences or am I just special?
thanks,
Dave