My 2001 cr125 has a leaky fuel valve (I think).
I let it sit for about a week, then went to start it the morning of a ride in my driveway. It wouldnt start, and after numerous attempts to bump start it I pulled the plug out of there. The plug was soaked with gas (FYI a fresh plug). I blew the plug off, and kicked the bike over numerous times with the plug out, then put the plug back in. It started right up. I let it run for a minute, then put it in the trailer. About an hour and a half later, I pull it out of the trailer at the track and try to start it. No luck. I pulled the plug, blew it off, kicked her over a few and put it back in. Bike fired right up, and ran fine for the rest of the day.
My question is, is this a symptom of a leaky petcock, and if it is, how do i fix it? Is there some kind of rebuild kit available with new seals or something?
As always, Thanks for your help.