Need a place to rebuild my rear shock

[m5shooter]

I got a KDX 200 and the shock sags a bit about 2 inches when i'm off the bike so i think i need to have it rebuilt, is there a shop that does this kind of work for a reasonable price.

Also any place that has a kit to mount front and rear turn signals on a rechargable battery with the handle bar controls.

I know Baja Designs sells a kit but it is almost $500 a bit more than i can afford and all i need are the turn signals.

Im not that good with a wrench so a kit that's plug and play would be nice.

 

[IndyMX]

Sounds more like you need to look at the spring. Either set the static sag properly, or replace the spring.

 

[mudpack]

Indy is right.
BTW, how much is "about 2 inches"? ProCircuit recommends 30-40mm static sag. 40mm is 1.6". You may not be far off...

 

[glad2ride]

Check the preload ring adjustment to be sure.

 

[HartlandMI]

it shouldn't be sagging at all when you're not on the bike though, should it? I'm having the same problem with a CR85. When I get off the bike it doesn't rise all the way up. I can lift it higher. Any ideas?

 

[sr5bidder]

its fine read static sag and race sag on google