Need Info Prior to First Fire!

[razorboy]

Hey Fellas,

I am on the home stretch to getting my PW80 fired up. Cleaned carb, bored / honed cylinder, new piston, etc.

I do not own a manual for this bike so I need a few questions answered to run it up right.

Correct sparkplug
Type of crankcase oil (how to check level)
Type of 2-stroke oil (any specific type?)
Recommended mixture
Recommended starting setup for carb (needle position, airscrew position?)
Any other checks, tweeks or simple mods prior to getting it fired up?

Thanx In Advance

Bernie

 

[FruDaddy]

Correct sparkplug
Clymer says NGK-BP6HS

Type of crankcase oil (how to check level)
Just grab some Yamalube from the dealer. Check it with the dipstick. Or drain the case an put 650 ml in it.

Type of 2-stroke oil (any specific type?)
I use Motul 600 in my 80.

Recommended mixture
Fill the tank, let the pump handle that part. Otherwise 40:1

Recommended starting setup for carb (needle position, airscrew position?)
Pilot screw-1 1/2 turns out. Clip-center position

Any other checks, tweeks or simple mods prior to getting it fired up?
None I can think of now.

 

[razorboy]

Thanx

Much appreciated..........