Hey guys, I'm a n00b here... I haven't ridden mx bikes in a long time (about 10 years), and recently got a '96 YZ125 from a friend for practically nuthin' ;)
Question is, I used to run Golden Spectro oil all the time, and had the mix ratio down perfect. Problem is, no one local to me carries Spectro anymore. I settled on Amsoil Dominator 2-stroke oil. With THAT oil, and my bike in mind, what are your suggestions for premix ratios?
It depends what the bike was previously jetted at, and what your specs are (temp and height from sea level).
It's most likely 32:1, but it may be different. I'd suggest checking it to see if it's at stock setting, if not, put it back to stock setting and run 32:1. See how that works out for you, and jet it accordingly from there.
Thanks guys. I know it's been jetted after the old owner swapped the filter element, opened up the airbox, and fitted a FMF pipe/silencer. Where he went from stock with the jetting I don't know.
I'll start at 32:1, and tinker from there. Thanks again! :cool:
Lot's of good oils out there but for me it's Maxima; Castor 927. Use to use BelRay MC1 but was told by a good machanic that he didn't think to much of that oil and suggested that I use Maxima. My 2 pennies.
Lot's of good oils out there but for me it's Maxima; Castor 927. Use to use BelRay MC1 but was told by a good machanic that he didn't think to much of that oil and suggested that I use Maxima. My 2 pennies.