superjetman5
Member
- May 15, 2003
- 2
- 0
Please help I am lost. I have a 2001 yam YZ 250 with no spark.
I cecked the ohm readings on the coil and it checks good.
I checked the reading on the stator and triger coil.
The sec. charge coil should be 900 ohm +- 20%. Mine was .800 ohms. So I ordered a brand new stator put it in and still no spark.
It also checked out to .800 ohm instead of 900.
Could the new one be bad too? Or do I have another problem?
This bike has 2 sets of wires to the carb also.
I think the CDI is bad but I want to be sure its $200.
Anybody have any advice. It would be helpful.
Thanks\
SJman5
I cecked the ohm readings on the coil and it checks good.
I checked the reading on the stator and triger coil.
The sec. charge coil should be 900 ohm +- 20%. Mine was .800 ohms. So I ordered a brand new stator put it in and still no spark.
It also checked out to .800 ohm instead of 900.
Could the new one be bad too? Or do I have another problem?
This bike has 2 sets of wires to the carb also.
I think the CDI is bad but I want to be sure its $200.
Anybody have any advice. It would be helpful.
Thanks\
SJman5